Jewelry Repair in Miami, Aventura & Boca Raton

Jewelry repair in Miami: where the benches actually are

Most jewelry stores do not repair anything on the premises; they send it out. The 47 jewelers listed above are the ones who work at the bench themselves or have one in the back, and nearly all of them sit in three buildings: the Seybold Building in downtown Miami, where the city's trade sends its own repairs, and the two International Jewelers Exchanges in Aventura and Boca Raton. Walking into one of those means the person quoting your repair is usually the person who will do it.

That matters for price and for honesty: a bench jeweler quotes what the job takes, not what a counter assistant thinks it should cost, and you can get a second quote from the bench next door in five minutes.

Ring resizing in Miami

Resizing is the most common repair in the building. A plain band goes up or down a size or two in a day, often while you wait; the jeweler cuts the shank, adds or removes metal, solders the seam and polishes it so the joint disappears. Rings with stones around the band are a different job: a half-eternity ring can usually move about half a size without touching the stones, and a full eternity or tension-set ring often cannot be resized at all and has to be remade. If the underside of the band has worn thin and flat, what you need is not a resize but a new shank, and a good bench will tell you so before you pay for the wrong thing.

• Bring the ring, not just the size: the bench measures the ring itself, and fingers change through the day.
• Say if the ring is engraved, has stones along the band, or is an heirloom; each changes the method.
• Ask for the quote and the turnaround in writing, on the same receipt that lists the metal and the stones.

Chains, clasps, prongs and loose stones

The other everyday jobs: a chain that snapped at one link (soldered and matched so the joint is invisible), a clasp that no longer holds (replaced with one matched to the metal and style), a prong that has worn down (re-tipped before the stone falls out), a stone that clicks when you tap it (tightened the same day). A stone that is already gone is the one job with no fixed date, because a matching diamond or colored stone has to be sourced first. Costume and plated pieces can sometimes be repaired, but often the honest answer is that the repair costs more than the piece; ask before you commit.

What a trustworthy repair looks like

Whatever bench you choose, the same four things protect you: a written intake receipt that describes the piece (metal, stones, weight, condition), a firm quote before any work starts, a stated turnaround, and a warranty on the workmanship. Photograph the piece before you hand it over. If a jeweler resists any of these, walk to the next booth. Our guide on how to choose a jeweler in Miami has the full checklist, and you can always ask Bizak & Co. for a free introduction to a bench that fits your piece.

Frequently asked questions